Steel for Boilers and Pressure Vessels P355GH

P355GH steel plate is characterised by a minimum yield strength of 280-355 MPa and by good weldability, so P355GH steel is mainly used to for manufacturing boilers, pressure vessels and pipes transporting hot liquids. the following are P355GH steel Chemical composition and P355GH steel mechanical properties.
P355GH steel plate specification:
Thickness: 6mm to 300mm,
Width: 1500mm to 4050mm,
Length: 3000mm to 15000mm
P355GH steel Chemical analysis -% by mass*:

Grades	C max	Si max	Mn. max	P max	S max	N max	AL min	Cr max	Cu max	Mo max	Ni max	Nb max	Ti max	V max
P355GH	0.10-0.22	0.6	1.10-1.70	0.03	0.015	0.012	0.02	0.3	0.03	0.08	0.3	0.02	0.03	0.02

P355GH steel Mechanical properties:

Grade	Thickness (mm)	Yield Strength MPa(min)	Tensile Strength MPa	Elongation % (min)	Impact Energy (KV J) (min)
Grade	Thickness (mm)	Yield Strength MPa(min)	Tensile Strength MPa	Elongation % (min)	-20℃	0℃	20℃
P355GH	≤ 16	355	510 to 650	20	27	34	40
	16＜t ≤40	345	510 to 650	20	27	34	40
	40＜t ≤60	335	460 to 580	20	27	34	40
	6＜t ≤100	315	490 to 630	20	27	34	40
	100＜t ≤150	295	480 to 630	20	27	34	40
	150＜t ≤250	280	470 to 630	20	27	34	40

P355GH steel application:
P355GH steel is mainly used for making the carburized parts which don’t have high demand on surface and section size < 50 mm in diameter, such as carburized small gear, small axis, low requirements piston pins, cross pin head, diesel engine sleeve, valve plunger mandril, gearbox joystick, steel bushing, etc of automobiles, tractors and in machine tools production. In addition, in the hot rolling and normalizing state P355GH steel can also be used for manufacturing rivet welding parts, screw and nut etc.
EN 10028-2 P355GH steel’s equivalent material in different standard.
Bebon International is a professional P355GH steel exporter and a steel Stockist in china. If you want to get the P355GH steel price, please do not hesitate to contact us.