EN10028-3 P460NL2 Pressure vessel steel plate, P460NL2 steel sheet Normalised

EN10028-3 P460NL2 Pressure vessel steel plate, P460NL2 steel sheet Normalised

EN10028-3 P460NL2 Pressure vessel steel plate shows that this is steel for pressure purposes (P) with minimum yield strength of 460 MPa (460) which is impact tested in the transverse direction at -50 deg C (NL2). P460NL2 steel sheet is high strength plate with improved notch toughness that allows it to be used in environments where high strength at low temperature is important.

P460NL2 Pressure vessel steel plate shall be under minus 50 centi degree when rolling. For these pressure vessel steel plate P460NL2,additional technical needs,such as HIC and UT is normally chosed to do by end users when enquiry and making orders.

P460NL2 steel sheet Chemical composition(%)

C≤0.20 Si≤0.60 Mn:1.10-1.70 P≤0.020 S≤0.010

EN10028-3 P460NL2 steel Mechanical property

Yield strength Mpa:400-460 Tensile strength Mpa:540-720

P460NL2 Pressure vessel steel plate Specification

Thickness: 6mm-350mm

Width: 1500mm-4200mm

Length: 3000mm-18000mm

Heat Treatment: Normalised

Delivery Time:30-50 days, 7 days for stock goods.

Loading Port:Shanghai ,Tianjin, Qingdao.

Other technology requirements:Z Test, UT (ultrasonic test), T (tempered), Q  (quenched), Q+T, PWHT  (simulated post-weld heat treatment), Elevated Temperature Tension Test) ect.

These are the specific information P460NL2 Pressure vessel steel plate, P460NL2 steel if meet your needs, please contact us ,if you have any questions about EN10028-3 P460NL2, we will answer your questions one by one.