EN10028-3 P460NL1 High Yield steel plate,P460NL1 steel sheet Yield strength

EN10028-3 P460NL1 High Yield steel plate is one of grade in En10028-3, which is non alloy and alloy steels with specified elevated temperature properties. P460NL1 steel sheet is used above all for manufacturing boilers, pressure vessels and pipes transporting hot liquids.

P460NL1 High Yield steel plate shows that this is steel for pressure purposes (P) with minimum yield strength of 460 MPa (460) which is impact tested in the transverse direction at -40 deg C (NL1). The specification EN 10028:3 covers a range of weldable fine grain steels supplied in the normalised condition and intended for pressure purposes. It has three steel grades (P275, P355, and P460) which indicate each grade’s minimum yield strength (in MPa) for plates 16 mm thick and below.

P460NL1 steel sheet Chemical composition(%)

C≤0.20 Si≤0.60 Mn:1.10-1.70 P≤0.025 S≤0.015 Al≥0.020 N≤0.025 Cr≤0.30 Cu≤0.70 Mo≤0.10 Nb≤0.05 Ni≤0.80 Ti≤0.03 V≤0.20 Nb+Ti+V≥0.22

P460NL1 High Yield steel plate Mechanical property

Yield strength Mpa:400-460 Tensile strength Mpa:540-730 Elongation min%:17

Supplementary Technology: HIC Test | NACE MR0175 | Z15 | Z25 | Z35 | S1 | S2 | S3 | S4.1

S5 | S6 | S7 | S8 | S9| S11 | S12 | S14 | S17

EN10028-3 P460NL1 High Yield steel sheet Specification

Thickness: 6-300mm

Width: 1500- 4050mm

Length: 3000mm-15000mm

Bebon is the manufacturer of P460NL1 steel, to provide you with a variety of EN10028-3 P460NL1 High Yield steel plate you need, Welcome to send inquiry to us if you are interested in EN10028-3 P460NL1.