EN10025 S355JR steel
S355JR steel is a more yield and tensile strength steel grade than S235JR and S275JR.
it is used to be in in riveted, bolted, or welded construction of bridges and buildings.
S355JR steel Chemical Composition (max) %
|
Grade |
C% |
Si% |
Mn% |
P% |
S% |
N% |
Cu% |
|
S355JR |
0.270 |
0.600 |
1.700 |
0.045 |
0.045 |
0.014 |
0.060 |
EN10025 S355JR steel plate mechanical Properties.
|
Grade |
Thickness(mm) |
MinYield(Mpa) |
Tensile(Mpa) |
Elongation (%) |
Min Impact Energy |
|
|
S355JR |
8mm-100mm |
315Mpa-355Mpa |
450-630Mpa |
18-20% |
20 |
27J |
|
101mm-200mm |
285-295Mpa |
450-600Mpa |
18% |
20 |
27J |
|
|
201mm-400mm |
275Mpa |
- |
17% |
20 |
27J |
|
|
The min impact energy is longitudinal energy |
||||||
S355JR steel Specifications or Size:
Round bar:
Diameter : 1mm-2000mm
Square bar:
Size: 50mm * 50mm-600mm *600mm
Plate steel/flat bar:
Size: Thickness: 0.1mm-800mm Width: 10mm to 1500mm
Tube/pipe:
Size: OD: 6-219mm WT: 1-35 mm.
Cold-rolled sheet: Thickness: 2-5mm Width:1000mm Length: 2000mm
Hot-rolled sheet: Thickness:6-80mm Width: 210-610mm
Length: We can supply any length based on the customer's requirement.
Forging/hot rolling/ extrusion of steel.
Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes