S460M Carbon and low alloy steel plate/sheet Material Equivalent grades

S460M Carbon and low alloy steel plate/sheet Material Equivalent grades

S460M Carbon and low alloy steel plate/sheet has a high strength. For steel plate thickness equal to and less than 40 mm steel plate S460M steel sheet tensile strength should be within 540-720Mpa. Low-temperature impact test at minus 20 ° C shall be performed on low-alloy steel plate S460M. When the steel sheet S460M was rolled, the maximum carbon content was 0.20%.

S460M steel sheet is especially intended for use in heavily loaded parts of welded structures, such as bridges, flood gates, storage tanks, water supply tank, ect., for service at ambient and low temperatures.

S460M steel sheet Specification

Thickness: 6mm-350mm

Width: 1500mm-4200mm

Length: 3000mm-18000mm

S460M steel plate Chemical composition(%)

C≤0.16 Si≤0.6 Mn≤1.7 Ni≤0.8 P≤0.03 S≤0.025 Cr≤0.3 Mo≤0.2 V≤0.12 N≤0.025 Nb≤0.05 Ti≤0.05 Al≤0.02 Cu≤0.55 CEV≤0.48

S460M Carbon and low alloy steel plate/sheet Mechanical properties

Tensile strength Mpa:490-660 Yield strength Mpa:385-460 Elongation(%):17

Heat Treatment: Thermo-Mechanical Control Process (TMCP)

Equivalent grades of grade S460M (1.8827)

Bebon International can offer various sizes of S460M Carbon and low alloy steel plate/sheet. We also provide additional service for S460M Carbon and low alloy steel plate/sheet like cutting, drilling and testing. S460M steel sheet is non-secondary. Welcome to inquiry.