EN10025 E355 Carbon and low alloy steel tube Equivalent Material

EN10025 E355 Carbon and low alloy steel tube Equivalent Material

EN10025 E355 Carbon and low alloy steel tube is under EN standard, we can regard E355 steel tube for general Construction steels. EN10025 E355 steel tube is for general Construction steels.The followings are the chemical composition and the mechanical properties of EN E355 steel. E355 steel is according to EN10025 standard and it is equivalent to DIN17100:St60-2, NFA:A60-2 and UNI7070:Fe590 steel grades.

E355 steel tube is widely used in the mechanical treatment field, petrochemical industry, transport and construction field. E355 can be also uses for ordinary structural purposes and mechanic structural purposes, for example in construction field, fulcrum bearing etc; the transportation of fluids in the projects and big equipments, for example transport of water, oil, gas etc.

EN10025 E355 steel tube Chemical composition(%)

C≤0.22 Si≤0.55 Mn≤1.6 P≤0.045 S≤0.045 N≤0.012

EN10025 E355 steel Mechanical properties

Yield strength Mpa:325-335 Tensile strength Mpa:570-770 Elongation%:7-14

EN10025 E355 Carbon and low alloy steel tube Specification

Thickness: 3 - 60 mm

Outer Diameter: 21.3 - 1220 mm

Length: 3m-12m

E 335 DIN EN 10025-2 Number: 1.0060    Equivalent Material

Surface Treatment: Painted, Oiled, galvanized or phosphate etc.

Technique: Hot Rolled

End Shape: Beveled end , plain end, varnished, or adding plastic caps to protect the two ends as per customer’s requirements

Bebon steel owning good customer service and after sales service for E355steel tube.Our own Q/C department examine goods for each order and send our inspection report to customer before shipment.If you are interest in E355 steel,pls choose our steel,we will satisfied with your need as possible.