EN10025-2 S355JR Carbon and low alloy steel round bar Equivalent Material

EN10025-2 S355JR Carbon and low alloy steel round bar Equivalent Material

EN10025-2 S355JR Carbon and low alloy steel round bar which can be readily welded to other weldable steel. About the named of S355JR steel,JR denotes the materials toughness by reference to Charpy_V impacting test at room temperature (20 C). In chinese steel standard GB,these is also one steel grade is the same as S355JR,it is Q345B and ST52-3 under DIN 17100.

S355JR steel round bar is a more yield and tensile strength steel grade than S235JR and S275JR. S355 offers high yield and tensile strength and is supplied with a variety of treatments and test options to ensure it is a highly. Structural application in freight cars, transmission towers, dump trucks, cranes, trailers, bull dozers, excavators, forestry mach.

EN10025-2 S355JR steel round bar Chemical composition(%)

C≤0.270 Si≤0.600 Mn≤1.700 P≤0.045 S≤0.045 N≤0.014 Cu≤0.060

S355JR steel Mechanical properties

Yield strength Mpa:275-355 Tensile strength Mpa:450-630 Elongation(%):17-20 Impact Energy Min:20,27J

S355JR steel round bar Specification

Diameter : 1mm-2000mm

Length: 4-12m

EN10025-2 S355JR Carbon and low alloy steel round bar Equivalent Material

Surface treatment: Black, bright

Technique:Cold rolled

HS Code: 72283090

Transport Package: Seaworthy Packing or Bseon Buyer ′s Requirement
Not only do we support a complete line of superior quality products,but also we provide good service after-sales for EN10025-2 S355JR Carbon and low alloy steel round bar.If you need urgent of A EN10025-2 S355JR steel round bar,if you have any hesitation about S355JR steel round bar,please feel free contact with us.