EN10025 2 S235JR material data sheet

S235JR material is defined in EN10025 2 standard. EN10025 2 is the European standard for hot rolled products of structural steels. Additionally EN10025 2 standard also specifies technical delivery conditions for non-alloy structural steels such as S235JR material.

S235JR is the EN mechanical and chemical designation stated in the EN10025 2 standard whereas 1.0038 is the numeric designation of the same grade.

EN10025 2 S235JR material data sheet - chemical composition of EN10025 2 S235JR material (max %):

Grade	C%	Si %	Mn %	P %	S %	N %	Cu %
S235JR	0.23	-	1.50	0.045	0.045	0.014	0.60

EN10025 2 S235JR material data sheet - mechanical properties of EN10025 2 S235JR material:
• The tensile strength of EN10025 2 S235JR material is expressed in MPa and it should be in the range of 360 to 510 MPa (N/mm2).
• The elongation property of EN10025 2 S235JR material changes with the heat treatment process and varies with the thickness. It is referred normally between 10% – 25%.
• The minimum impact energy longitudinally of EN10025 2 S235JR material is 27 Joules at 0 degree Celsius.

EN10025 2 S235JR material is low carbon structural steel which can be readily welded to other weldable steel. With its low carbon equivalent, EN10025 2 S235JR material possesses good cold-forming properties. EN10025 2 S235JR plate is produced by fully killed steel process and supplied in normalized or controlled rolling condition.